Inspirating Tips About How To Clean Slim Ps2 Lens

Screwdriver multi purpose grease or silicon lube cotton swab brush step 2:

How to clean slim ps2 lens. Removing any dirt or debris from the optical drive open the disc tray of your ps2 slim and inspect the optical drive for any dirt or debris. Works for me just about every time on any slim ive tried it on. It was an otherwise working unit, but would stutter and.

Today i am going to show you how to clean the lens on the ps2. Use a can of compressed air to blow away dust and loose particles from the inside of the optical drive. Playstation 2 slimline troubleshooting, repair, and service manuals.

The slim model, not the ori. If the drive motor is going out, you're kinda sol. If you have the covers off and just replaced the lenses you should always plug it back in w/ the top off still and adjust it until you see the disc spinning rapidly and laser is moving back and forth.

Removing this sticker will void any warranty with sony. This video tutorial will teach you how to properly clean your playstation 2 slim laser. Flip it over flip over the ps2 and remove 4 plastic and 2 rubber tabs remove 6 screws step 4:

Four 55.4 mm philips screws four 18.0 mm phillips screws 2 comments step 2 This can best be removed by disassembling the unit and carefully cleaning the lens. I found two playstation 2's in the trash along with an xbox 360.

Playstation 2 slim brings lots of nostalgia, so i took some time to clean it and replay some old great titles. Remove cables turn it off remove memory card,joystick,video&audio,power and ethernet cable step 3: If the lens read strength is weakened, there might be a way to adjust it to be stronger, usually with a potentiometer adjustment that involves opening the console.

One of the feet is located under the sticker shown in the photo. This can severely affect the performance of your gaming console. I disassemble and clean a lens for a playstation 2 / ps2.

This guide will explain how to replace the laser for the ps2 slim. You will need you will need: Step 1 top cover flip the playstation 2 over so it lays with the bottom of the device facing upwards.

Flip the new assembly over and connect the brown ribbon that is glued to the metal shield. This fixes most ps2 that can not read the disc. If the problem still persists, you need to replace the lens.

Ps2 slim is also known for having problems with the eject button, so in this. How to safely open your ps2 slim console. Try cleaning the lens by opening the disc container and wiping it with a smooth piece of cloth.